Convert to Activity Walker
08
Press the fixing buttons on both sides of the bottom plate as shown in
t
he figure, and take out the bottom plate. Insert the rear wheel knob
into the mounting hole until the knob button can be stabilized on the
rear wheel. Then turn the knob as needed to adjust the speed of the
rear wheel. （Turn the knob counterclockwise to increase the speed
of the wheel. Rotate the knob clockwise to slow down or lock the
wheel.）
When the product returns to the baby walker, the rear wheel knob
must be removed. The operation is as follows: unscrew the knob
completely against the direction of the arrow, and then disconnect the
knob outwards.
To Previous Page
Loading...
