To Next Page
J
jamessantiagoAug 7, 2025
What to do if the green LED is flashing on my Cotech 18-2532 HT8750-GBCLA Media Converter?
- CChristina CarterAug 7, 2025
If the green LED is flashing on your Cotech Media Converter, it could be due to several reasons: * The battery voltage might be low, in which case you should charge the battery. * The input voltage could be too high, so check the battery and its power supply (alternator and charging relay). * The overload cutout might have tripped, prompting you to check all supplied devices. * The overheat cutout may have tripped; switch off the product and let it cool down for at least 15 minutes. * There might be a short circuit somewhere in the system, requiring you to check all cables and connections. If none of these steps resolve the issue, further assistance may be needed.
General