Cotech E0127T2-V2 User Manual

6
ENGLISH
Troubleshooting guide
Themain unit doesn’t
display anything.
• Check thebatteries in themain unit and sensor.
Temperature from out-
door sensor not dis-
played.
• Check that thedistance between themain unit and
sensor does not exceed 30m.
• Make sure that thedevices are located at least 2m
from monitors and TV sets.
• Avoid placing thedevices on or close to window
frames made of metal.
• Avoid using electronic devices such as loudspeakers
which operate at thesame frequency (433MHz),
close to thedevices.
• Check thebatteries in themain unit and any
connected sensors.
• Remove thebatteries, wait awhile and then reinsert them.
Displayed temperature
is incorrect.
• Remove thebatteries, wait awhile and then reinsert them.
• Make sure that thedevices are not affected by heat
sources or air-conditioning units and such.
Specifications
Main unit
Temperature (indoor) 0 to 50 ºC (32 to 122 ºF)
Temperature (outdoor) −30 to 50 ºC (−22 to 122 ºF)
Accuracy ±0.5 ºC
Batteries 2×AAA/LR03 (sold separately)
Size Ø 92mm, height 20mm
Weight 80g
Sensor
Batteries 2×AAA/LR03 (sold separately)
Update interval 60 seconds
Frequency 433 MHz
Range 30m
Size 38×100×18 mm
Weight 30g

Cotech E0127T2-V2 Specifications

General

Brand	Cotech
Model	E0127T2-V2
Category	Thermometer
Language	English