Need help?Do you have a question about the COUGAR APOLAR 120 ARGB and is the answer not in the manual?
The device described in this manual is the COUGAR APOLAR 120 ARGB, an "ELITE UNIVERSAL MODULAR FAN" designed for cooling computer components. It is available in both single-pack and three-pack configurations.
The APOLAR 120 ARGB fan is primarily designed to provide efficient cooling for computer systems while offering aesthetic enhancements through its Addressable RGB (ARGB) lighting. Its modular design allows for flexible installation and connectivity, aiming to simplify cable management and improve overall system aesthetics. The fan incorporates several features to optimize performance, reduce noise, and ensure durability.
Fan Model: Apolar 120 ARGB Dimensions: 120 x 120 x 28 mm Fan Speed: 600-2200 RPM ± 200RPM Air Flow: 75.38 CFM ± 10% Air Pressure: 2.59 mm H2O ± 10% Acoustic Noise: 37.1 dB(A) (Max.) Rated Voltage: 12 VDC (Fan) / 5 VDC (LED) Rated Current: 0.2 A (Fan) / 1.1 A (LED) Power Consumption: 2.4 W (Fan) / 5.6 W (LED) Bearing Type: HDB Hydro Dynamic Bearing Cable Length: 490 mm (Fan) / 470 mm (ARGB) Connector & Control: 4 Pin PWM / 3 Pin ARGB Weight: 196 g ± 5g
Modular Design: The APOLAR 120 ARGB features a unique interlocking modular design that allows multiple fans to be connected without additional cables between them. This simplifies installation, reduces cable clutter, and creates a cleaner build aesthetic. The manual illustrates how to align and connect the pins and protruding parts of the fan with the connector to link them together.
Q-Stop Elimination Vibration Technology: This technology is integrated to eliminate vibrations at any angle, contributing to a quieter operation. The double suspension of vibrations aims to reduce noise and improve the overall user experience.
ARGB Lighting: The fan incorporates Addressable RGB (ARGB) lighting, allowing for customizable illumination. The manual mentions that the location of the light bar guarantees a complete illumination of the ARGB from any angle. The ARGB lighting is controlled via a 3-pin ARGB header on the motherboard.
PWM Control: The fan supports Pulse Width Modulation (PWM) control, enabling precise adjustment of fan speed based on system temperature. This optimizes cooling performance and reduces noise when full speed is not required. The manual specifies that installing a 4-pin fan on a 3-pin header will no longer benefit from PWM control, emphasizing the importance of correct connection.
Hydro Dynamic Bearing (HDB): The use of HDB technology contributes to the fan's longevity and quiet operation. This bearing type is known for its durability and reduced friction compared to traditional bearings.
Universal Compatibility: The fan is designed for universal application, compatible with various PC setups. It can be connected to an available 4-pin or 3-pin fan header on a motherboard or fan controller.
Anti-Vibration Rubber Pads: The package includes adhesive anti-vibration rubber pads that can be attached to the fan's mounting holes. These pads further reduce vibrations and ensure a more stable operation, contributing to a quieter system.
Flexible Installation: The manual demonstrates how to pull the fan clips up to prepare for installation. The modular design allows for easy expansion by connecting multiple fans. However, it is recommended not to exceed three fans due to power source limitations. If connecting four or more fans, there is an increased probability of malfunction due to insufficient voltage. An "OVERLOAD" warning is provided, advising users to take note of their power source devices' maximum current load to avoid overload.
Connectivity:
While the manual does not explicitly detail maintenance procedures, the design and component choices imply certain aspects related to longevity and ease of upkeep:
Durable Components: The use of Hydro Dynamic Bearings (HDB) is a key feature that contributes to the fan's long lifespan and consistent performance, reducing the need for frequent replacement or maintenance.
Modular Design for Replacement: Should a single fan in a multi-fan setup fail, the modular design might simplify the process of replacing just the faulty unit without having to dismantle the entire cooling array, though this is not explicitly stated.
Warranty: The product comes with a 3-year warranty, indicating the manufacturer's confidence in its durability and providing support for potential defects during this period. This reduces the user's burden for repairs or replacements within the warranty timeframe.
The APOLAR 120 ARGB is presented as a high-performance, aesthetically pleasing, and user-friendly cooling solution for modern PC builds, emphasizing ease of installation and quiet operation.
To Next Page
General