4 Introduction
602378 REV AA
12/18/2018
SPECIFICATIONS
ORDERING INFORMATION
Tractor Category Category 1 and Category 2 tractors only
Gear Box
Special alloy pinion gears and tapered roller bearings on both sides of each gear, 540 rpm
Driveline Equipped with quick-tach yoke to fit standard 6 spline PTO (completely shielded)
Augers Sold separately. 6 in., 9 in., 12 in., 18in., and 24in. sizes available
Cutting Edges Sold separately. Replaceable carbide
Point Sold separately. Cast ductile iron, spiral point, replaceable.
Boom 3 in. O.D. high strength tubing
A-frame 3 in. O.D. high strength tubing
Safety Shields On driveline, gear box "U" joint and gear box output shaft
Shear Pin Replaceable. On input shaft to protect driveline, augers, and gears
Options Hydraulic down force kit and weight mounting kit
PART NO. DESCRIPTION
602377 Heavy Duty post hole digger less auger
S24121100 6 in. auger with spiral point and replaceable carbide cutting edges
S24121400 9 in. auger with spiral point and replaceable carbide cutting edges
S24121700 12 in. auger with spiral point and replaceable carbide cutting edges
S24054800 18 in. auger with spiral point and replaceable carbide cutting edges
S24054900 24 in. auger with spiral point and replaceable carbide cutting edges
S24121900 Spiral point 6 in., 9 in., 12 in., 18 in., and 24 in. augers
S24122200
2 in. carbide cutting edge for 6 in., 9 in., 12 in., 18 in., and 24 in. augers
(Quantity required varies by auger size)
To Next Page
Loading...
