2
INTRODUCTION
TO THE OWNER:
Read this manual before operating your implement. Keep this manual handy for reference.
Require all operators to read this manual carefully and become acquainted with all
adjustments and operating procedures before attempting to operate the equipment.
READ THIS MANUAL BEFORE ASSEMBLING OR OPERATING YOUR IMPLEMENT.
REQUIRE ALL OPERATORS TO READ THIS MANUAL.
OBSERVE ALL SAFETY INFORMATION IN THIS MANUAL AND SAFETY DECALS ON THE
IMPLEMENT.
The equipment you have purchased has been carefully engineered and manufactured
to provide dependable and satisfactory use. Like all mechanical products, it will require
cleaning and upkeep. Lubricate the unit as specified. Please observe all safety information
in this manual and safety decals on the equipment. Use only genuine service parts.
Substitute parts will void the warranty and may not meet standards required for safe and
satisfactory operation.
For more information and questions, please contact:
1-844-338-8721
CUSTOMER INFORMATION
Name___________________________________________________
Purchased From__________________________________________
Date Purchased___________________________________________
Model__________________________________________________
Serial #_________________________________________________
PREPARATION CHECKLIST
Verify the following before operating your Rotary Cutter
1. implement is completely assembled.
2. Gearbox is filled with oil and checked for
possible leaks.
3. All fittings are lubricated.
4. All shields in place and in good condition.
5. All fasteners torqued to specifications in
torque chart. (Pg. 36)
6. Check PTO driveline. Make sure it is the
correct length to operate Rotary Cutter
with intended tractor.
7. Check front of input gearbox shaft and make
sure that snap ring is properly installed.
8. Check shear/retaining bolt for proper grade
and installation.
9. All decals in place and legible.
10. Overall condition good (i.e. paint, welds)
11. Operator’s manual has been given to owner
and the owner has been instructed on the
safe and proper use of the Rotary Cutter.
To Next Page
Loading...