Need help?Do you have a question about the COURIER ML100 and is the answer not in the manual?
FCC regulations for repairs, license requirements, and unit's illegal use.
Steps for mounting the bracket, connecting power, and antenna.
Adjusting plate coil taps for different frequency ranges.
Lowering power input and maintaining 13.8VDC input.
Manual provides instructions for installation, operation, and service.
Contact FANON/COURIER Service Department for repairs.
Details dimensions, weight, power requirements, output, and frequency range.
Servicing requires standard test equipment and a regulated 13.6VDC supply.
Maximum input power limits for different transmission modes.
List of essential test equipment for servicing and calibration.
Diagnosing common problems like no output, low power, and voltage issues.
Procedure to test the high voltage power supply output and regulator.
Measuring HV, observing oscillator wave pattern using oscilloscope.
Steps for tuning the amplifier for AM mode using driver and wattmeter.
Adjusting plate tuning and load for maximum power output in AM.
Steps to tune the amplifier for FM operation using driver and wattmeter.
Table showing output watts for different input watts.
Diagram showing the physical location of components on the ML-100.
Detailed schematic diagram of the ML-100 circuit with component labels.
List of transistors, coils, transformers, relays, capacitors, diodes, and tubes.
List of miscellaneous parts like sockets, bulbs, connectors, fuses, and holders.
List of miscellaneous items: terminal strips, screws, heat sinks, bezel, mounting bracket.
To Next Page
General