Courtyard HYPH4601-7 - Page 4

Bond Manufacturing Co., Inc. | Page 4
HARDWARE
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part appears missing or damaged, don't use this product
and call customer service immediately.
Estimated assembly time: 30 minutes.
Tools required for assembly (not included): Phillips Screwdriver, Wrench.
Combustible materials should not be within 61
cm / 24 in of the top of the unit, or within 61 cm
/ 24 in around the entire unit.
SAFETY INFORMATION
Min. Clearance
61 cm /
24 in
Min. Clearance
61 cm /
24 in
Min. Clearance
61 cm /
24 in
BE CAREFUL: WHEN CERTAIN MATERIALS OR
ITEMS ARE STORED ABOVE, BESIDE OR UNDER
THIS HEATER WHILE IN USE, THEY WILL BE
SUBJECT TO RADIANT HEAT AND COULD BE
SERIOUSLY DAMAGED.
ytQnoitpircseDmetI
3tuNpaC6MAA
4M6 NutBB
3tuN8MCC
3tuNgniW5MDD
3sdutS6MEE
3sdutS8MFF
4Anchoring NutGG
AA BB CC DD EE FF
GG