Need help?Do you have a question about the Coustic & 480QE and is the answer not in the manual?
The 4-channel amplifier can be configured for 4, 3, or 2-channel operation with built-in filters.
Features continuously adjustable 18 dB per octave high-pass/low-pass filters for fine-tuning.
Includes over-current, short circuit, and DC offset protection with automatic shutdown.
Utilizes advanced audio circuitry for optimal operation and audio quality.
Provides full-range line outputs for system expansion or adding another amplifier.
Adjustable input sensitivity from 100 mV to 5.0 volts for source unit matching.
Compatible with floating or common ground car stereos, and aftermarket units.
Maintains stability even in reactive low impedance environments.
Enhances bass performance with a continuously variable boost up to 18 dB.
Port for optional remote control to adjust subwoofer level in a moving vehicle.
Details of switches, knobs, and input/output jacks on the amplifier's front panel.
Information on power input, ground, remote, fuse, and speaker output terminals.
Explains the advantages and usage of the amplifier's 18 dB per octave electronic crossovers.
Describes setting up a bi-amplified system using the amplifier's capabilities.
Guidance on configuring the amplifier for quasi 3-channel operation.
Explains the meaning of the red protect indicator and troubleshooting.
Recommendations for speaker loads in stereo and bridged mono modes.
Guidance on using appropriate power cables and installing circuit breakers/fuses.
Important safety, wiring, and grounding system considerations for installation.
Recommendations for amplifier placement to ensure adequate heat dissipation.
Step-by-step instructions for securely mounting the amplifier.
Guidance on routing audio and power cables, and making RCA/speaker connections.
Detailed instructions for connecting speakers and the amplifier to the battery.
Instructions for connecting the remote turn-on and optional subwoofer level control.
Procedure for matching source unit output to amplifier input for optimal sound.
How to select filter modes (HPF, LPF, OFF) and adjust crossover frequencies.
Guidance on using the Bass Boost control for enhanced bass performance.
Instructions for setting up the optional RS remote subwoofer control.
Diagnosing and resolving problems related to power, sound, and protection indicators.
Troubleshooting common audio problems like no sound from one side or system noise.
Technical details including rated power, frequency response, and dimensions.
Details of the warranty coverage, exclusions, and consumer rights.
To Next Page
General