Need help?Do you have a question about the COVENANT HAVEN SC-100 and is the answer not in the manual?
Explains VOX technology in intercoms, emphasizing one-at-a-time conversations and preventing feedback.
Key reminders for users to ensure optimal performance and satisfaction with the intercom units.
Details on adjusting VR26 for gooseneck dominance, with a warning against unauthorized adjustments.
Instructions for adjusting VR131 to control remote/outside microphone sensitivity.
Guidance on adjusting VR31 for master/inside microphone sensitivity.
Provides solutions for clipped conversations by adjusting potentiometers R31 and R131 for microphone sensitivity.
Important notes regarding potentiometer balancing, assembly placement, and VR26 default settings for calibration.
Step-by-step guide for installing the SC-100 model, including tool requirements and part separation.
Specifies the minimum and maximum diameter required for the barrier hole during installation.
Instructions for adjusting listen and talk controls after power-up, and notes on ideal speaking distances.
Important instructions on how to properly remove the headset from the base unit to prevent damage.
Steps for initial setup, including activating the battery circuit, reassembling the unit, and charging.
Clarifies that the POWER LED color change (Green to Red) does not indicate the remaining battery charge.
Lists essential tools required for the installation of SC-200/300 models, such as nut drivers and screwdrivers.
Details the items typically found in the box for SC-300 Master and Remote Units, including cables and adapters.
Provides instructions on drilling a 0.25" hole in the backbox for interconnect cable entry/exit.
Guidance on drilling mounting holes and mounting the remote unit, noting that hardware is not included.
Instructions for connecting the interconnect cable to the Remote Unit terminals and the Master Station circuit card.
Steps for threading the AC adapter cable and connecting it to the unit, with polarity notes.
Instructions for reinstalling the remote module and master panel using provided screws, cautioning about wiring.
Final step to power on the unit by plugging the AC adapter into the outlet.
Lists necessary tools for SC-350 installation, including specific nut drivers and screwdrivers.
Details the components included in the SC-350 package, such as the Master Unit, Window Module, and cables.
Instructions for drilling a 0.25" hole in the master unit backbox for cable passage.
Guidance on mounting the window module, including the use of optional adapters for larger holes.
Steps for connecting the interconnect cable to the RS-1 window module and the Master Station.
Procedure for connecting the AC adapter cable to the unit, including polarity and wire handling precautions.
Instructions for reattaching the RS-1 Window Module and Master Panel, emphasizing care with wiring.
The final step to power on the SC-350 unit by connecting the AC adapter to an outlet.
Instruction to remove four tamper-resistant screws from the faceplate using the provided tool.
Step 1 provides instructions for drilling four mounting holes in the back or bottom of the unit.
Step 2 details drilling a 1/2" diameter hole in the backbox center for cable entry.
Step-by-step guide for installing the SC-350, including removing screws, separating parts, and reconnecting cables.
Specifies the minimum (3.0") and maximum (3.5") diameter for the barrier hole during SC-350 installation.
Lists the tools necessary for SC-350 installation, such as nut drivers and screwdrivers.
Notes regarding cross marks for reference only and selective anodizing for lettering and logos.
Notes on reference marks, and selective anodizing for lettering and logos on the master unit.
Details HTC's warranty period, service procedures, exclusions, and limitations of liability for the product.
General| Brand | COVENANT |
|---|---|
| Model | HAVEN SC-100 |
| Category | Intercom System |
| Language | English |
To Next Page