Page 9For technical questions, please call 1-888-866-5797.Item 56184
Attach Front and Back Covers
1. Position Front Cover (20) so that zipper pulls are facing toward the outside. Make sure zippers are closed.
2. From inside, wrap the hook and loop straps around the Rails. Make sure to
connect all straps. Secure straps completely around the Rails.
Straps
Inside
3. Repeat for Back Cover (21).
4. From the inside, using a wrench (not included), tighten the Ratchet Tie Down’s
handles, alternating between each corner, until straps are snug.
5. Tighten all connections throughout the shed before use.
Do not overtighten.
SAFETYMAINTENANCE ASSEMBLY
To Next Page
