COVERPRO 62860 - User Manual

WARNING! TO PREVENT SERIOUS INJURY: Do
not start or operate any internal combustion
engine inside or near Portable Garage.
Visit our website at: http://www.harborfreight.com
Email our technical support at: predator@harborfreight.com
62860
10 F T. X 17 F T.
PORTABLE GARAGE
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 23c
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
Copyright
©
2023 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Summary

Owners Manual and Safety Instructions

Save This Manual for Future Reference

Keep the manual and receipt in a safe, dry place for future reference.

Critical Safety Warning: Engine Operation

Warning against operating internal combustion engines inside the garage.

Warning Symbols and Definitions

Hazard Level Definitions

Explanation of DANGER, WARNING, CAUTION, and NOTICE symbols.

Visual Safety Alerts and Gear

Illustrations of safety symbols and required protective gear.

Important Safety Information

Assembly Precautions

Guidelines for safe and proper assembly procedures.

Use Precautions

Rules for safe operation and usage of the portable garage.

Frame Assembly Overview

Frame Assembly Diagram

Visual representation of the main frame structure for assembly.

Roof Frame Assembly Steps

Assemble Ridge and Connect Rafters

Steps for constructing the main roof frame structure using connectors and rafters.

Roof Side Rail Installation

Assemble and Install Roof Side Rails

Detailed steps for attaching side rails to the roof frame connectors.

Foot, Leg, and Stud Assembly

Assemble Feet, Legs, and Studs

Instructions for preparing the vertical support components of the frame.

Stud Installation

Install and Secure Frame Studs

Steps for raising and connecting studs to the roof assembly.

Anchoring the Frame

Verify Measurements and Anchor Frame

Ensuring correct dimensions and securing the frame to the ground.

Securing and Releasing Ratchet Tie-Downs

Securing Ratchet Tie-Downs

Instructions for tightening straps to secure covers using ratchet mechanisms.

Releasing Ratchet Tie-Downs

Steps for properly loosening and detaching straps from the ratchet.

Cover Installation

Door and Back Cover Installation

Process for attaching the front door and rear back covers to the frame.

Roof Cover Installation

Prepare and Position Roof Cover

Laying out and initially positioning the main roof cover onto the frame.

Bottom Rail and Corner Securing

Install Bottom Rails and Secure Corners

Inserting bottom rails into the cover and anchoring cover corners to the frame.

Maintenance Schedule

Monthly Inspection Checklist

Key items to check monthly for product integrity and safe operation.

Cleaning Procedures

Remove Debris and Wash Cover

Guidelines for removing debris and washing the cover with mild soap.

Parts List and Diagram

Component Identification

List of all parts with descriptions, illustrations, and quantities.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

The Cover Pro Portable Garage is a versatile and robust shelter designed to provide protection for vehicles, equipment, or other items from the elements. It is intended for temporary use and offers a practical solution for storage needs where a permanent structure is not feasible or desired. The garage features a sturdy frame construction and a durable cover, ensuring reliability and longevity under various weather conditions.

Function Description

The primary function of the Cover Pro Portable Garage is to offer a sheltered space for parking vehicles, storing tools, or protecting other valuable assets. Its design allows for relatively quick assembly and disassembly, making it suitable for situations requiring flexible and temporary shelter. The garage's structure is engineered to withstand moderate environmental stresses, providing a barrier against sun, rain, and light snow accumulation. It is not designed for long-term shelter or as a permanent structure, emphasizing its role as a temporary protective solution. The garage's cover is designed to be secured tightly to the frame, preventing flapping in windy conditions and ensuring the integrity of the enclosed space. The inclusion of door and back covers allows for full enclosure, protecting contents from exposure and unauthorized access.

Usage Features

The Cover Pro Portable Garage is designed with several features to enhance its usability and safety.

• Temporary Use: This garage is specifically intended for temporary applications. Users should be aware that it is not built for long-term shelter and should be removed if harsh weather or heavy rain threatens.
• Assembly Requirements: The assembly process requires at least three workers to ensure proper and safe installation. All connections should be finger-tightened until the entire assembly is complete, and the structure should be assembled on a flat, level surface.
• Anchoring System: The garage includes an anchoring system to secure it firmly to the ground. This is crucial for stability, especially in windy conditions. Users are advised to contact local utility companies before installing anchors to avoid damaging underground pipes, cables, or other hazards. For concrete surfaces, specific concrete anchors are provided.
• Ratchet Tie-Downs: Ratchet tie-downs are used to secure the covers (door, back, and roof) to the frame. These tie-downs allow for precise tensioning, ensuring the covers are taut and resistant to wind. However, users are cautioned against excessive tightening, which can damage the straps, covers, and corner legs.
• Door and Back Covers: The garage features a zippered door cover for easy access and a back cover for full enclosure. These covers are designed to wrap around the rafters, with straps positioned inside the frame for secure attachment. It is important not to insert framework tubing into the hem on the cover flaps during installation.
• Roof Cover Installation: The roof cover is installed by aligning it with the frame, sliding bottom rails into pockets, and using ropes (sold separately) to pull it over the top of the frame. This method ensures proper positioning and a snug fit.
• Safety Precautions:
  • Ventilation: A critical safety feature is the warning against operating internal combustion engines inside or near the portable garage. Engine exhaust contains carbon monoxide, a poisonous gas that can be fatal. All engines must be operated OUTSIDE and far away from the shed, windows, doors, and vents.
  • Wind and Weather: The garage should not be used in high wind conditions, and the cover should be removed if harsh weather or heavy rain threatens.
  • Flammability: The garage is not designed as a tent and does not meet tent flammability standards. Grills, heaters, or any ignition sources should not be used inside or near the cover.
  • Load Bearing: Users must not allow snow, rainwater, or debris to accumulate or pool on the cover, as this can compromise the structural integrity. Objects should not be hung from any part of the garage.
  • Children and Play: This product is not a toy, and children should not be allowed to play with or near it.
  • Personal Protective Equipment (PPE): During assembly and service, users are advised to wear ANSI-approved safety goggles with side shields, heavy-duty work gloves, and a hard hat to prevent eye, hand, and head injuries.
  • Installation Surface: The garage must be assembled and anchored on a flat, level, hard surface. Before anchoring, verify that the installation surface has no hidden utility lines.
  • Structural Integrity: Regular inspection is necessary to ensure all hardware and straps are tight, and anchors are secure. Any damaged, bent, or stretched parts must be replaced immediately, as loose hardware or damaged parts can compromise the product's structural integrity.

Maintenance Features

Maintaining the Cover Pro Portable Garage is essential for its safe operation and longevity.

• Monthly Inspection: A monthly inspection of the garage's general condition is recommended. This includes checking for:
  • Loose ratchet tie-downs, anchors, tube connections, and rail clamps, which should be tightened as needed.
  • Torn or frayed covers, straps, or cables, which indicate wear and tear and may require replacement.
  • Cracked, bent, or broken parts of the frame or connectors. Any such damage should be addressed promptly.
  • Any other condition that might affect the safe operation of the garage.
• Damage Protocol: If any damage is noted during inspection, the product should not be used until the problem is corrected. Repairs not specifically explained in the manual should only be performed by a qualified technician.
• Cleaning:
  • Debris Removal: Accumulated debris, such as leaves or branches, should be immediately removed from the cover using a broom, mop, or other soft-sided instrument from the outside. Sharp instruments should NOT be used, as they can damage the cover material.
  • Cover Cleaning: Periodically, the cover should be cleaned with mild soap and water. Bleach or harsh abrasive products should NOT be used, as these can degrade the cover material.
• Label Maintenance: Product labels and nameplates carry important safety information. If they become unreadable or go missing, contact Harbor Freight Tools for a replacement to ensure all safety warnings are visible.
• Hardware Tightness: Hardware may loosen during normal operation stresses. Regular inspection and tightening of all loose hardware are crucial to maintain the structural integrity of the product.

By adhering to these usage and maintenance guidelines, users can ensure the safe and effective operation of their Cover Pro Portable Garage, maximizing its protective capabilities and extending its lifespan.

COVERPRO 62860 Specifications

General

Brand	COVERPRO
Model	62860
Category	Tent
Material	Polyethylene
UV Protection	Yes
Water Resistance	Water-resistant
Size	10 x 20 ft