Page 5For technical questions, please call 1-888-866-5797.Item 56410
4. Pull out the Locking Pin on each Leg and
extend the Inner Leg until the Pin clicks
into place to raise the Canopy to its
desired height.
5. Attach the hook and loop strips to each
corner and overhead Trusses.
6. Secure the bottom of each Leg using
sandbags (not included) or the included
Ground Anchors.
7. The four loops on the roof can be used to
tie down the canopy for added stability.
(Tie downs/ropes not included.)
Locking
Pin
Ground
Anchor
Loop on
Canopy
To Next Page
Loading...