NOTE: Make sure to press OK to save your settings.
If you do not press OK, your setting will return back
to the previous setting.
Trigger Mode Settings:
PIR Sensitivity: The camera is triggered by heat and
motion.
• Low
• Auto
• High
PIR Interval: The camera will be triggered based on
the interval you select. We recommend using a 30
second trigger interval.
• 5-60 seconds in 5 seconds steps
• 1-5 minutes in steps of 1 minute
• 5-60 minutes in steps of 5 minutes
Time Lapse: Camera release at defined intervals:
• 5-60 seconds in 5 seconds steps
• 1-5 minutes in steps of 1 minute
To Next Page
Loading...