Need help?Do you have a question about the Covidien Nellcor OxiMax N-560 and is the answer not in the manual?
General| Type | Pulse Oximeter |
|---|---|
| Trend Time | Up to 72 hours |
| Measurement Parameters | SpO2, Pulse Rate, PI, PVI |
| PI Range | 0.02% to 20% |
| Compatible Sensors | Nellcor OxiMax sensors |
| SpO2 Range | 0% to 100% |
| Power Source | AC Adapter, Battery |
| Pulse Rate Range | 20 to 250 bpm |
| Battery Type | 2 AA alkaline batteries |
| PVI Range | 0% to 100% |
Provides an overview of the service manual and describes the N-560 Pulse Oximeter's function.
Lists essential supplementary documents and outlines basic maintenance tasks for the device.
Lists all required equipment and details the initial setup for performance verification.
Covers power-up self-tests, general operation, and detailed pulse oximetry functional tests.
Explains how to configure audible alarms, silence options, and adjust volume levels.
Categorizes common issues and provides corrective actions for power, button, and display problems.
Guides on interpreting error codes and performing component disassembly for repair.
Details performance ranges, electrical requirements, and environmental operating conditions.
Covers safety standards, EMC, and data port interface protocols for device interaction.
Explains the fundamental principles of oximetry and the technologies employed in the N-560.
Details block diagrams, power supply, PCB theories, and front panel functionality for system understanding.
To Next Page
