10
9
BEFORE USE
Tips
This product is for 220 V- 240 V~ 50 Hz, 60 Hz only.
Make sure to connect the power plug to a grounded
220 V- 240 V~ 50 Hz, 60 Hz outlet.
- Be sure to remove the packaging vinyl before installing the lter.
- Use the lter indoors only.
- Unplug the power cord from the outlet when not using the product.
- Check the front of the lter when installing it.
▶ Filter assembly sequence: Deodorization lter → HEPA lter
1. Open the front cover.
Pull the top of the front cover to open it.
2.
Take out the lter and remove the packaging vinyl.
Remove the packaging plastic from all lters
except the pre- lter and
assemble the product
according to the lter assembly sequence.
∗
Filter assembly sequence: Deodorization lter →
HEPA lter
3. Fix the front cover.
Align the two projections on the bottom of the
front cover with the grooves and push in the
cover to x it.
∗
The product will not operate if the front cover is not
xed correctly.
▶
Please check before use!
How to Install Filter
AIR PURIFICATION PROCESS / BEFORE USE
How to Use
To Next Page
Loading...
Need help?
General
