SAFETY INFORMATION
DANGER : Failing to follow the precautions below may result
in serious injury or even death.
•
Do not use damaged power plugs or loose sockets.
• The power plug must be plugged into 220 V – 240 V~ 50 Hz, 60 Hz.
•
Do not pull on the power cord to move the device.
•
Do not touch the power plug with wet hands.
•
To avoid damaging or warping the power cord, do not use excessive
force to bend the power cord or put heavy objects on top of it.
•
Do not repeatedly connect and disconnect the power plug.
•
If water enters the power supply, unplug the power and completely
dry before using again.
•
Be sure to unplug the power during product repair, maintenance
or part replacement.
•
If the power plug's pins or contact area become covered in dust or
water, wipe them thoroughly.
•
Do not plug several electric appliances into one socket, and use
only a dedicated socket.
•
Unplug the power when not used for a long time.
•
Do not carelessly connect or tamper with the power cord.
•
If the power cord is damaged, do not replace it yourself. Contact a
service center to have it replaced.
•
Do not install near electric heaters.
•
Do not put on top of electric products like heaters or televisions.
The following information is for user
safety that should be observed.
It is to ensure user safety and prevent property damage.
Please read the precautions carefully and use the
product correctly.
220 V – 240 V~ 50 Hz, 60 Hz only
To Next Page
Loading...
Need help?
General
