To Next Page
P
Peter PonceAug 15, 2025
How to change the airflow speed on Coway AP-1512HH?
- PpcooperAug 15, 2025
To change the airflow speed on your Coway Air Cleaner, set the desired operating mode.
How to change the airflow speed on Coway AP-1512HH?
To change the airflow speed on your Coway Air Cleaner, set the desired operating mode.
What to do if my Coway AP-1512HH Air Cleaner has a bad smell?
If a bad smell is coming from the air outlet of your Coway Air Cleaner, the filter cleaning or replacement time may have passed. Check the filter cleaning and replacement cycles, and then clean or replace the filter(s) if necessary.
Why is no air blowing from my Coway AP-1512HH?
If no air is blowing from your Coway Air Cleaner, ensure the power cord is connected to a 120 V~, 60 Hz electric outlet. Also, make sure you've pressed the power button and selected the desired function. If there was a power outage, the air purifier should resume functioning when the power comes back on. Finally, ensure the front cover is properly closed.
Why is the airflow speed significantly weaker on my Coway AP-1512HH Air Cleaner?
If the airflow speed of your Coway Air Cleaner is significantly weaker than before, the filter cleaning or replacement time may have passed. Check the filter cleaning and replacement cycles, and then clean or replace the filter(s) if necessary.
What to do if the pollution level indicator always stays the same on my Coway Air Cleaner?
If the pollution level indicator on your Coway Air Cleaner always stays the same, there might be dust on the pollution sensor’s lens. Clean the lens of the pollution sensor. If the pollution level keeps indicating a high level, adjust the sensitivity of the pollution sensor to Insensitive or standard. Conversely, if it keeps indicating a low level, adjust the sensitivity to sensitive or standard.
What to do if bad smell comes out of Coway AP-1512HH?
If a bad smell is coming from the air outlet of your Coway Air Cleaner, the filter cleaning or replacement time may have passed. Check the filter cleaning and replacement cycles and then clean or replace the filter(s) if necessary.
Why is the airflow speed of my Coway AP-1512HH Air Cleaner weaker than before?
The airflow speed of your Coway Air Cleaner might be weaker than usual because the filter cleaning or replacement time has passed. Inspect the filter cleaning and replacement cycles, and clean or replace the filter(s) if needed.
What to do if no air is coming out of Coway Air Cleaner?
If no air is coming out of your Coway Air Cleaner: * Ensure the power cord is plugged into a 220 V- 240 V~ 50 Hz, 60 Hz outlet. * Press the power button and select the desired function. * If there was a power outage, the air purifier will resume operation after the power comes back on. * Make sure the front cover is closed properly.
Why does the pollution level indicator always stay the same on my Coway Air Cleaner?
If the pollution level indicator on your Coway Air Cleaner always stays the same, it could be due to a few reasons: * There might be dust on the pollution sensor’s lens - clean the lens. * If the pollution level keeps indicating a high level, adjust the sensitivity of the pollution sensor to Insensitive or standard. * If the pollution level keeps indicating a low level, adjust the sensitivity of the pollution sensor to sensitive or standard.
What to do if other functional problems are detected in Coway Air Cleaner?
If you detect other functional problems with your Coway Air Cleaner, check the symptoms, unplug the product, and contact the service center.
General| Timer | Yes |
|---|---|
| Air purify rate | - m³/h |
| Number of speeds | 3 |
| Timer duration (maximum) | 8 h |
| Suitable for room volume up to | 34 m³ |
| Product color | Black |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 243 mm |
|---|---|
| Width | 427 mm |
| Height | 465 mm |
| Weight | 5600 g |
