Coway Aquamega 200C - Page 28

03 Maintenance
󾖴󾖴󾖴󾖴


󾖴󾖴󾖴󾖴󾖴󾖴󾖴
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖼
󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴󾖴
󾖴󾖴󾖼

󾖴󾖴󾖴󾖴󾖺󾖴󾖴󾖴󾖻󾖼
NOTE
- New filters must be flushed out first before use.
- dispense the ambient water for 3 minutes before using the cold water.
Make sure that you run the ambient water to flush the filters properly before using the cold water.
After replacing the filter, drain the remaining cold water to clean the cold water tank. 
(See "How to Clean the Internal Water Tank" on page 19)

󾖴