CLEANING METHOD
Uninstallation the Product
1. Unplug the power plug from the outlet.
2. Close the main water supply valve.
3. Place a big wash basin (1 L or more) under the rear
drain hole of the bidet.
4. Turn the drain stopper
1
counter clockwise by 90 ° and
pull out it in the direction of the arrow
2
to remove it.
- Please assemble the drain stopper to the product again after
draining.
5. Please separate the product from the fixing plate by
pulling out it forward.
- Please pull out the power plug and separate the bidet hose before
separating the product.
- When storing the product, separate the filter fixing stopper and
MF filter from the bidet and store them with installation materials.
- Exercise caution not to lose fixing screws and fixing nuts..
When you don’t use the product for a long time, please pull out the power cord after
turning off the main water supply valve and emptying the water inside of the water tank.
Tips
1
2
To Next Page
Loading...
