Maintenance
22
21
HOW TO REPLACE THE FILTER
After changing the lter and connecting the tting and the hose precisely,
check that there is no leakage and drain the rst round of puried water after lter change.
Tips
5.
After separating the tting connected to the lter, please replace the lter.
▶
▶ ▶
4. Raise the lever for the hot water faucet on the left side of the
product. In the case of the
cold/ambient water faucet, lift the lever on the right side of the product.
(Since you need to lift the lever when replacing the front cover, water may leak for a certain
duration if there is water in the tank.) Hold the top of the front cover, pull it forward to separate
it, and then disconnect all the connected cables to separate it completely.
*
To detach the front cover, disconnect the cable and pull the cover towards you.
To Next Page
Loading...
