6. Connect all the separated cables, align the 3 holes of the front cover and the 3 buttons,
and close the cover by pushing it towards the product.
After closing the front cover, re-place one cap-faucet on the top of the product.
Please be sure to use the new filter after cleansing.
- Neo-sense filter : Please assemble after cleansing with Neo-sense filter for
about 1 minute.
- Membrane filter (RO) : After cleansing with the main water passed
Neo- sense filter for about 5 minutes, please assemble it.
- Plus Inno-sense filter : Please use the filter without flushing.
Tips
▶
HOW TO REPLACE THE FILTER
To Next Page
Loading...
