14
13
How to Use
INDICATION / OPERATION PART
■ To use the Cold Water function
Press the Cold Water button for 2 or more seconds and check
that the Cold Water function is illuminated on the display
and the Cold Water Temperature Indicator is illuminated.
To turn o the Cold Water function, press the Cold Water
function button for 2 or more seconds again.
You can get cold water about 30 minutes after you turn on
the cold water function.
■ To use the Hot Water function
Press the Hot Water button for 2 or more seconds and check
that the Hot Water function is illuminated on the display and
the Hot Water Temperature Indicator is illuminated.
To turn o the Hot Water function, press the Hot Water
function button for 2 or more seconds again.
You can get hot water starting about 30 minutes after you
turn on the hot water function.
■ To use the Power Saving function
Hold the Power Saving button for 2 seconds or more to turn
on the Power Saving function.
The Power Saving indicator blinks when it detects that it is
night.
If the Power Saving indicator is lit, the cold water
temperature will be kept warmer when the area around
the purier is dark.
- If cold water is not released from the water purier, check that the Cold Water
Mode indicator is lit up on the display (see p. 11).
- When the level of room water inside the water tank is low, you may not be
able to get as much water as usual.
- When there is a power failure or the power cord is reconnected, the machine
is reset to its most recent settings.
- This product has a Power Saving function when not in use. If it is not used for
a long time (about 9 hours), the hot water temperature is automatically kept
lower and the cold water temperature higher to help reduce electricity costs.
When in Power Saving mode when not in use, hot water may be cooler and
cold water warmer than usual.
Tips
2 seconds2 seconds2 seconds
2 seconds2 seconds2 seconds
2 seconds2 seconds2 seconds
To Next Page
Loading...
Need help?
General
