20
19
Water ltration device installation place 1
Please install the water ltration system not at a rough place, a damp
place, a place where the unit is exposed to the direct sunlight, a
place where dust is present, or a place that the water drops.
Water ltration device installation place 2
Please install at the place where it is 10 cm or more o from the wall
and the bottom is at and rm.
After installing the water ltration system
Please empty the water tank lled with ltered water two times after
the product installation.
Cold water plumbing
Please connect the source water. Make sure that the source water is
not from hot water line. If you use hot water as source water, then it
will cause permanent damages to lters and severely degrade the
product performance.
Movement and installation
When the position is moved, connect the power cord when 30
minutes passes after installing.
Be cautious!
To maintain optimal product performance, consult a Coway engineer for the
detailed installation methods.
There may be some water remaining inside of the lter which was used to
test the product during inspection process at the factory.
Please feel at easy and use as it isn’t the used product.
Don’t reuse the main water supply valve and hose that was previously used
when you re-install the product.
Tips
INSTALLATION
Maintenance
Twice after
installation
Cold water
pipes
Hot
water X
30 minutes
after moving
Twice after
installation
Cold water
pipes
Hot
water X
30 minutes
after moving
Twice after
installation
Cold water
pipes
Hot
water X
30 minutes
after moving
To Next Page
Loading...
Need help?
General
