• After installing the water purier
Please lter the water more than 70 minutes and drain them 2 times or more to use.
• When indicator lights on the display is turned o
When the indicator light is o, check if there is a blackout or if the power supply is cut o for
other reasons.
• Regular lter replacement
Regular lter replacement is crucial for clean drinking water. Using expired lters decreases water
purier performance, so please replace the lters on time.
• When the product has not been used for a long time
If you stored water or have not used the water purier for a long time, drain the water more than
once before usage.
• When planning to not use the product for a long time
Turn o the tap water valve and unplug the power cord when the product is not in use for a long
time.
When you don’t use for a long time, turn o the tap water valve and unplug the
power cord.
Tips
Please check before use!
This product is for 220 V - 240 V~, 50 Hz.
Make sure to connect the power plug to a grounded 220 V - 240 V~,
50 Hz outlet.
It requires a power supply to operate.
INSTALLATION PRECAUTIONS
How to Use
10
9
To Next Page
Loading...
