Place for Installing Water Purier I
Avoid installing the water purier in an area with uneven surface, extreme humidity, extreme
light exposure, extreme dust exposure, and water exposure, etc.
Place for Installing Water Purier II
Keep the radiator grill at the rear of the product at least 10 cm away from the wall and make sure
that the installation oor is rm.
After Installation
Please empty the water tank lled with ltered water two times after the product installation.
Cold Water Tubing
Make sure to connect it to the cold water tubing (If connected to the hot water tubing, the lters
can get damaged).
Relocation and Installation
When moving between locations, wait at least 30 minutes after installation to connect the power.
Caution!
To maintain optimal product performance, consult a Coway Technician for the
detailed installation methods.
Some residual water used during post-manufacturing inspection may be
present in the lter.
Do not be alarmed as it is not a used product.
Do not reuse the previously used tap water supply valve and hose when
installing the purier.
Tips
HOW TO INSTALL
Maintenance
18
17
To Next Page
Loading...
Need help?
General
