16
15
HOW TO GET THE DESIRED WATER / HOW TO INSTALL
HOW TO INSTALL
Installation Guide
▶ Feed water supply condition : 20 psi, 3 LPM or higher
Tap Water
Supply Valve
Connect the orange inlet for the tap water supply hose
1
to
the tap water pipe. Connect the drain connection
2
.
(COLD OUT
3
)
INLET : Tap water supplying hose (Orange) tubing
COLD WATER OUTLET : Fitting
HOT WATER OUTLET : Drain (Grey) Connection
Only for
220 V - 240 V~, 50 Hz
Maintenance
1
32
To Next Page
Loading...
