HOW TO REPLACE FILTER
5. Insert the new lter in the appropriate order of the lters.
6. Check that the lter holder comes down for a secure t. Then, open the tap water valve
(Rotate 90 degrees in the
direction of OPEN).
7. Close the lter cover on the front.
For tting, tubing, or faucet that have been used for more than 5 years, contact the
service center, and we can replace it with new ones(Replacement costs may incur).
Tips
Be sure to wash the new lter before use.
- Nanotrap™ Filter / Plus Inno-Sense Filter(D) : Wash the new lter for about 3 minutes using continuous
water extraction after installing the lter.
Tips
To Next Page
Loading...
