Press hot water button and then press extraction button
once temperature selection indicator on the display unit blinks.
How to Get Hot Water
How to Get Warm Water
- If hot water is not being dispensed, please press HOT ON/OFF button at the bottom of the
product to check that the indicator is on.
- Please be careful of burns when using hot water.
Tips
- Warm water is a function that mixes certain amount of hot water and cold water.
This product has been configured to produce warm water when the indicators of hot water and cold
water temperature are turned on to the maximum level.
Therefore, the water may be hotter or colder than usual if temperatures of hot and cold water are not equivalent.
Also, the water may be hotter than usual when low water level indicator is on.
- Please be careful of burns when using warm water as it may be hot.
Tips
▶ ▶
▶ ▶
Press hot water button and turn the dial to select the temperature of warm water once temperature
selection indicator on the display unit blinks,
then press extraction button.
HOW TO GET THE DESIRED WATER
To Next Page
Loading...
Need help?
General
