HOW TO REPLACE THE FILTER
Replace the Filter!
1. Disconnect the power plug, lock the tap water valve, and discharge all water inside the
water ltration device. (Refer to P.21)
2. Use a screw driver (+) to loosen the two screws on the door side cover.
3. Please disconnect the tting connected to the lter
you wish to replace and replace the lter.
(Use appropriate tool to disconnect the tting.)
After replacing the lter, connect the tting and the hose accurately to ensure
that there is no leak and dispose the initially ltered water.
Tips
▶ ▶
▶ ▶
To Next Page
Loading...
