24
23
HOW TO CLEAN
Maintenance
8.
Use prepared water to wash out the internal water tank and connect the power plug.
Use the discharge hose to completely discharge all water as well as initially ltered water before use.
9.
Rotate antibacterial lter into the internal water tank cover, close the internal water tank cover,
and close xture clips(6) of the internal water tank.
10.
Close the door side cover of the upper cover, and open the tap water valve.
Check that water is being dispensed from the cold water/ltered water and hot water extraction
faucets and press the COLD ON/OFF and HOT ON/OFF buttons at the bottom of the product to turn
on the LED. Press the cold water button to reactivate the water ltration device.
▶ ▶
▶
▶
▶
To Next Page
Loading...
Need help?
General
