PLEASE CHECK BEFORE USE
The main water supply must be turned on for the product to run normally.
When the indicator in the indication part is turned off, check if the power supply was
shut off due to power failure or other causes.
When the user has saved water for a long time or has not used water for a while, drain
the water inside the water ltration device completely, and rinse the water tank with the
newly ltered water one time before use.
Following the product installation, make sure the water tank is emptied or the water is ltered for
50 minutes or longer. (Empty the water tank lled with ltered water two times or more.)
It is very important to replace the lter regularly to maintain the intended water quality.
If the lter is used beyond its service life, the performance of the water ltration device will
deteriorate. Take note of the lter replacement cycle.
Close the main water supply valve and unplug the power cord.
09
To Next Page
Loading...
Need help?
General
