SAFETY INFORMATION
Do not use a damaged power plug or loose electric outlet.
Please connect the power plug to a dedicated grounded electrical outlet for
220 V - 240 V~ 50 Hz.
Do not move the product by pulling only the power cord.
Do not handle the power plug with wet hands.
Do not forcefully bend the power cord or place it under a heavy object to
prevent it from being damaged or deformed.
Do not repeatedly connect and disconnect the power plug.
If the electric outlet is wet, carefully unplug the product and let the electric
outlet dry completely before subsequent use.
Make sure to unplug the product before repairing, inspecting or replacing a part.
Remove any dust or water from the power plug.
Do not plug the product into an electrical outlet or power strip that is being used
by several other appliances. Use an electrical outlet dedicated to the product.
Unplug the system if it is not used for a long time.
Do not attempt to repair or modify the power cord yourself.
If the power cord is damaged, do not replace the cord yourself.
Call a service center to have it replaced.
Do not install the product near a heating device.
Do not install the product in locations exposed to moisture or water (rainwater).
Do not use the product in areas where ammable gases or combustible
materials are used or stored.
If the product produces a strange noise, burning smell or smoke, unplug it
from the electrical outlet immediately and call our service center.
03
To Next Page
Loading...
Need help?
General
