Maintenance
Install the product in a cool part of the room, on an even surface, avoid direct sunlight and
away from humidity, dust, and dripping water.
Allow a clearance of 10 cm or more behind the product, and level the water ltration unit.
Filter the water for more than 50 minutes or ll and drain once before using the unit.
(Drain the ltered water more than twice.)
If the unit is relocated, do not plug in the power cord until 30 minutes after the unit has been
installed.
Make sure the unit is connected to the cold water supply line.
(If connected to the hot water supply line, the ltration unit may be damaged.)
16
To Next Page
Loading...
