2. Installation / Removal
2-1 Installation
1. Open up jetAudio 5.0 installation folder. Double click the file (JAD500b1, exe)
and go through general procedure of installation.
2-2 Removal
You can remove jetAudio program in the same way that you remove other
programs.
Start, Installation, Control Panel, Program Addition/Removal and select jetAudio
and click Removal. Then you will see the Figure 2.7. Click removal on this
window and then the program will be removed successfully.
The folder, in which jetAudio has been installed, and the folders such as jetCDP.sdb,
jetWave, JADPlugins.cache file, won’t be removed unless you remove the each
folder respectively.
To Next Page
Loading...