COX CRUISER ZTR - Maintenance Schedule

We are proud that you have purchased a Cox ZTR and urge you to follow these instructions to obtain the
maximum life for your machine. If in doubt check with your Dealer.
MAINTENANCE SCHEDULE
BEFORE EACH USE
Check engine oil level, adjust if required
Check engine air cleaner foam pre-cleaner, service if required.
Check engine rotating screen/finger guard, clean if required.
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check for loose fasteners, tighten if required.
Check cutting attachment cutter blades, bolts, nuts, housing and
guards for wear or damage, replace if required
BEFORE STORAGE
Change engine oil - Clean machine - Lubricate as per required
EVERY 5 HOURS
Check engine oil level, adjust if required
Check engine air cleaner foam pre-cleaner, service if req.
Check engine rotating screen/finger guard, clean if required.
Check operation of safety switches, service if required.
Check tyre pressures, adjust if required
Check for loose fasteners, tighten if required.
Check cutting attachment cutter blades, bolts, nuts, housing and guards
for wear or damage, replace if required.
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.......................... CUSTOMER/DEALER.............................................
1 MONTH OR 5 HOURS which ever occurs first
Change engine oil
Check engine air cleaner foam pre-cleaner , service if required
Check engine rotating screen/finger guard, clean if required
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, housing, and guards
for damage, replace if required
Check drive levers, adjust if required.
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.......................... CUSTOMER/DEALER.............................................
3 MONTH OR 25 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient temperature.
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required.
Check mowing attachment cutter blades, bolts, nuts, housing and guards
for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.......................... CUSTOMER/DEALER.............................................
6 MONTH OR 50 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient temperature.
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required.
Check tyre pressures, adjust if required
Check mowing attachment cutter blades, bolts, nuts, disc/s, housing ,and
guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS.......................... CUSTOMER/DEALER.............................................
9 MONTHS OR 75 HOURS which ever occurs first
Change engine oil if operating under heavy load or high ambient temperature.
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check operation of safety switches and replace if required.
Check tyre pressures, adjust if required.
Check mowing attachment cutter blades, bolts, nuts, housing and guards
for wear or damage, replace if required
Check for loose fasteners, tighten if required.
Check drive lever for smooth action, adjust if required.
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................CUSTOMER/DEALER.............................................