COX Homelife - Page 2

Congratulations, the installation and pairing process is now complete!
To learn more about Door Locks or Rules, and find other helpful
information, visit us online at cox.com/diyhomelife
For Homelife technical support, call 1-877-404-2568
Smart Door Locks
Pairing Instructions
5
Configure Door Lock
1. On the Configure Door Lock Devices screen, press the “Door Lock”
icon to configure it.
2. Tap the ‘Door Lock Name’ field to display a keyboard and enter the
desired name for the door lock (example: Front Door).
3. Press Next to complete configuration. Press the Touchscreen’s home
button to return to the home screen.
Program User Codes
1. Now, at your door lock, press the Program button on the inside
panel one time.
2. On the door lock’s keypad, enter a new user code between 4 and 8
digits.
3. Press the Lock button once.
4. The keypad will flash green and beep once to indicate programming
was successful.
5. Repeat the process to program additional user codes.
Complete Door Lock Installation
1. Attach the back cover of the door lock and secure it with the provided hex
screws.
2. Make sure the door latch operates properly by locking and unlocking the door.
6
Unlocking the Door
1. Press the Lock button (optional, but necessary in order to illuminate the
keypad).
2. Enter a valid User Code.
Note: If three incorrect codes are entered consecutively, or if three
timeouts occur within one minute, the keypad will be locked for 60
seconds. After 60 seconds, you may try again.
Locking the Door
1. Press the Lock Button.
Note: If no user codes are programmed, the Lock button will be disabled.
Program
Inside Panel
Keypad
Lock
Front of Lock
4
You can now set up Rules to get notifications when someone enters or leaves your home, or trigger actions
such as turning on connected lights when you unlock the door.