7 / 9
● Network Setting
Through this section user can set TCP/IP, Wi-Fi and WAN network.
1. Use TCP/IP link the software to download data
Press 【MENU】 key enter the menu ------Choose【Network】 press “ok” or “4”.
【Mode】: Network mode: Local network and WAN network
Local means Local network
Internet means WAN/Web based/BS/Cloud, user need to follow our
communication protocol to do secondary development can use.
【Server Set】: Useless in local network. Please ignore and no need to set.
【Enable】: Yes means use local network, NO means closed local network.
【DHCP】: Yes means DHCP is open, No means set manually.
【IP Address】: This IP Address need to be unique and effective in users
local network. When user link machine with software need to input this IP
Address in the software. If DHCP is yes, the device will according to the
local network environment to automatically get IP Address, user also can set
manually.
【Subnet mask】&【Gateway】: If DHCP is open, the device will according to
the network environment to automatically get, user also can set manually.
【DNS Sever】：When set the DNS Sever IP ,the device can synchronize the time with
the DNS Sever once each hour.
If you want to set this function, please make sure the time zone is right, such as the
device is used in China, then the time zone must be set GMT+8
【MAC address】：MAC address of the attendance machine
ETH
1. Enable NO
2.DHCP NO
3. IP Address 192.168.001.224
4. Subnet mask 255.255.255.000
5.Gateway 192.168.001.001
6. DNS Server 192.168.001.001
7. MAC Address e8:ab:fa:79:31:15
To Next Page
Loading...