CPG 351FGC100 - User Manual

Other manuals for CPG 351FGC100

Service Manual18 pages

Questions and Answers

G
Gina SchultzAug 2, 2025
How to troubleshoot CPG Convection Oven burner that will not turn on?
- K
  Kyle BarryAug 2, 2025
  To troubleshoot a CPG Convection Oven burner that won't turn on, make sure the gas supply is on and at the correct pressure. Also, ensure the unit is plugged in with the correct voltage, the power switch is on, and the doors are closed with the cook switch engaged. Check that the thermostat is set higher than the oven's current temperature. Verify the ignition module isn't locked out (RED LED light blinking), and inspect the surface igniter and internal gas valve.
A
Angela WellsAug 6, 2025
Why CPG 351FGC100 burner flame will not light or maintain flame?
- B
  Bobby CaldwellAug 6, 2025
  If the burner flame on your CPG Convection Oven won't light or stay lit, examine the surface igniter, orifice openings, and flame sensor. Also, check the ignition module and ensure the correct gas is supplied as indicated on the nameplate.
M
Morgan BlackAug 11, 2025
Why my CPG 351FGC100 is not reaching temperature?
- D
  davisjamieAug 11, 2025
  If your CPG Convection Oven isn't reaching the set temperature, first make sure the thermostat is set correctly. Verify the fan is running and the burners are staying on. Finally, check the thermostat probe.
R
rebeccarodriguezAug 15, 2025
Why is my CPG Convection Oven producing black soot?
- C
  Curtis DayAug 15, 2025
  If the burners on your CPG Convection Oven are producing black soot, ensure that the ventilation is correctly set up. Check the burner air and orifice openings. Also, verify the unit is plugged in, the power switch is 'ON,' the doors are closed in 'cook' mode, and the correct voltage is going through the power switch.
M
melendezaaronAug 19, 2025
What to do if CPG Convection Oven burner will not turn off?
- B
  brian41Sep 12, 2025
  To resolve a CPG Convection Oven burner that won't turn off, start by checking that the thermostat is turned "OFF". Then, inspect the temperature sensor/probe and the internal gas valve.
C
Christine EstradaAug 25, 2025
Why CPG Convection Oven burner flames are small or weak?
- N
  nancy54Aug 25, 2025
  If the burner flames on your CPG Convection Oven are small or weak, check the burner air openings and adjust them if needed. Inspect the orifice opening for each burner. Ensure the ventilation is set up correctly and check the gas pressure at the manifold.
K
Kenneth CampbellAug 27, 2025
What to do if CPG 351FGC100 Convection Oven blower fan will not turn on?
- C
  Courtney McdonaldAug 28, 2025
  If the blower fan on your CPG Convection Oven won't turn on, check if voltage is getting to the fan. Inspect the fan speed switch and both door switches.