CPR Callblocker CS600 - Security settings; Restore factory settings; Safety and Attentions

- 18 -
111 Security settings
Here you can do security settings for SIM card,
phone and keypad.
1.Press Menu to Settings.
2.Scroll to security settings and press OK. Then you
can see sub-menus below:
A.SIM security
Here you can setup PIN lock status on or off.
Change PIN code
B.Phone security
Here you can setup Phone lock status on/off.
Change password
C.Screen auto lock
Press OK to on/off auto lock.
Restore factory settings
Press OK and input password (1122) to reset your
phone to the default.
Safety and Attentions
In order to use your mobile phone safely and
efficiently, please read your messages before using:
1. Please be careful when you are near chemical
plant, gas station, tank farm and other exploders.
Even if your mobile phone is in standby, it will
send out RF signal as well. Therefore, please
power off your mobile phone.
2. When you are driving, do not use your mobile
phone. If you have to use it, please park your car