platform: {Azure Sphere OS 21.10} device: {Guardian3} language: {English}
GUARDIAN III USER GUIDE
Table of Contents
Introduction
Prerequisites
Prepare the Device
Connect to Azure IoT Central
Integration with Azure IoT Explorer
Additional Links
Introduction
About this document
This document describes how to connect GUARDIAN III to Azure IoT Hub using the Azure IoT Explorer with
certified device application and device models.
IoT Plug and Play certified device simplifies the process of building devices without custom device code. Using
Solution builders can integrated quickly using the certified IoT Plug and Play enabled device based on Azure
IoT Central as well as third-party solutions.
This getting started guide provides step by step instruction on getting the device provisioned to Azure IoT
Hub using Device Provisioning Service (DPS) and using Azure IoT Explorer to interact with device's capabilities.
Guardian III is an IoT gateway product series based on Microsoft Azure Sphere OS. It provides end-to-end IoT
security solutions and can be used in a variety of industrial fields.
Guardian III has multiple types of southbound interfaces, such as LoRa, Bluetooth, Ethernet, CAN, RS422,
RS485, etc., which can be easily connected to many devices or sensors. At the same time, it also includes three
types of northbound interfaces (WiFi, Ethernet, 4G), you can easily connect to the Internet.
The Guardian III series includes three different product forms, namely GIIICM680L, GIIICM680E, and
GIIICM680R. The main difference between the three product forms is the southbound interface.
Prerequisites
You should have the following items ready before beginning the process:
For Azure IoT Central
Azure Account
To Next Page
Need help?
General
