CR Laser FIT-D RG User Manual

RG
NON-INTERLOCKED HOUSING WARNING
This unit contains high power laser devices internally. Do not open the
laser housing, due to potential exposure to unsafe levels of laser radiation.
The laser power levels accessible if the unit is opened can cause instant
blindness, skin burns and fires.
LASER EMISSION DATA
As measured under IEC measurement conditions for classification.
Version: 1.0
This manual contains important laser operation information. Read and
understand all instructions prior to powering on laser unit the first time, to
avoid laser eye injury and to avoid breaking the law. Keep this manual in a
safe place for future reference.
Laser Classification Class 3B
Green Laser Medium DPSS Nd:YVO4, 532nm
Red Laser Medium LD GaAlAs 650nm, typical
Beam Diameter <5mm at aperture
Pulse Data All pulses < 4Hz (>0.25sec)
Divergence (each beam) <2 mrad
Divergence (total light) <160 degrees
Laser Power
Red>100mW, Green>40mW

CR Laser FIT-D RG Specifications

General

Red Laser Power	100mW
IP Rating	IP20
Laser Color	Red, Green
Control Modes	Auto, Sound
Power Supply	AC110-240V, 50/60Hz

Summary

Non-Interlocked Housing Warning

Laser Radiation Hazard

Warning about exposure to unsafe laser radiation if housing is opened.

Laser Emission Data

Laser Classification and Medium

Details the laser classification (Class 3B) and mediums used.

Laser Power and Divergence

Specifies laser power output and beam divergence for different colors.

Product Overview

Device Description and Safety Notes

General safety instructions and manufacturer liability for device use.

Component Identification and Operation

Component Descriptions

Details the name and function of each numbered component on the unit.

Control and Function Guidelines

Provides guidelines for operation, breaks, and servicing.

Laser Operation Modes

AUTO SHOW Stand Alone Mode

How to activate and use the automatic laser show mode.

SOUND ACTIVATED SHOW Mode

How to activate and use the music-synchronized laser show mode.

Advanced Operation Modes

Sound Sensitivity Adjustment

How to adjust the sensitivity for sound-activated modes.

DMX and Master/Slave Modes

Configuration for DMX control and master/slave synchronization.

DMX Protocol Details

DMX Channel Functions

Maps DMX channels to control functions like Mode, Zooming, and Axes.

DMX Pattern Control

Details patterns controlled by DMX Channel 2.

Specifications

Technical Specifications

Details technical parameters like power, voltage, dimensions, and classification.