CR Lite 71002 - Operating Instructions; Operating Modes; DMX Mode Operation; LED Operation Menu

• Always
mount
this
unit
un safe
and
stable
matter.
• Power-supply cords should
be
routed
so
that
they
are not likely
to be walked
on or
pinched
by
items
placed upon or against
them,
paying
particular
attention to the
point
they
exit
from
the
unit.
• Cleaning
unit
should
be cleaned only
as
recommended
by the
manufacturer.
• Heat
—The
appliance should
be
situated away
from
heat sources
such
as radiators,
heat registers,
stoves,
or other appliances
(including
amplifiers)
that
produce
heat.
•
The unit
should be serviced by
qualified
service
personnel
when:
A.
The
power-supply
cord
or
the
plug
has
been damaged.
B. Objects have fallen,
or liquid has been spilled
into
the
appliance.
C. The appliance
has
been exposed
to rain
or waten
D. The
appliance does
not
appear
to operate normally or exhibits s marked
change
in
performance.
Operating
Instructions
Operating Modes: You
can use
the unit in 4 ways:
Auto
Mode-The
unit will automatically
chase
through
the
different
colors.
Sound-Active mode—The
unit will
react
to
sound,
chasing
through
the
built-in
programs.
DMX
control mode —
This
function
will allow
you
to control
each
individual
units
traits with
a
standard DMX 512
controller.
e Master-slave mode — One unit will
work as the
master
in
the
one
of the
above
three
modes,
other
units
in
the
chain will work
in
synchronization
towards the
master.
DMX
Mode: Operating
throuéh
a DMX.
controller
give the;
user
the
freedom to
create their
own
Programs
tailored
to
their own individual
needs. This function
also allows
you
to use your
units as
spot
lights.
I.
This
function will allow you
to
control
each
individual unit's traits with
a standard DMX 512
controller.
2.
The
LED unit
uses
7 DMX
channels
to
operate.
Please see
"DMX Values and
Functions" for the
DMX
traits.
3. To
run your
unit in DMX
mode, plug in
the
unit
via
the XLR connections
to
any standard DMX
controller. Set
your
desired
DMX address
following the
setup
specifications
that
come
with your
DMX
controller.
LED Operation
Menu:
LED
screen
with
four touch
buttons:
MENU, UP,
DOWN
and ENTER.
1
.Press
MENU may
select the
function
you
want.
0
2.Press
UP
or DOWN
may
adjust the
values.
3.ENTER
is
confirmation
button,press
ENTER
will
save
the
MENU
UP
DOWN
ENTER
setting you
want.