71002
User
Manual
General Instructions
Thank
you for
purchasing our
high power
led par light. Every
unit
has been
thoroughly
tested
and
shipped
in
perfect
condition.To
optimize the
performance
of this
product, please
read these
operating
instructions
carefully
to familiarize you
with the
basic
operations of this
unit.
These
instructions
contain
important
safety
information regarding
the
use
and maintenance
of this unit.
Please
keep
this
manual
with the unit,
for future reference.
Features
'Multi-Colors
• Master/Slave
synchronization
•Color
Strobe
• LED
operation menu with
function buttons
•Electronic Dimming 0-100%
e
Sog%d active
mode
.DMX-512
protocol •
Daisy Chain
Units Together
in DMX Mode
•source:
18pcs X
3in1(1W) RGB full-color LEDs,Digital Display
•voltage:
ACIOOV-AC240V
Power: 30W
Safety
Precautions
• To
reduce the risk
of
electrical
shock or fire, do not expose this unit to moisture.
e Do not
spill water or
other liquids
into
or on to your unit.
• Be
sure that
the local
power outlet
match that of the required voltage for
your unit,
•
Do not attempt to
operate this
unit if the
power cord
has
been
frayed or broken.
Do
not
attempt to
remove
or break off
the ground
prong from
the electrical
cord.
This prong is
used
to
reduce the
risk
of
electrical shock
and fire
in case
of
an
internal short.
• Disconnect
from main
power before making
any type of
connection.
• Do
not remove
the cover under any conditions. There are user serviceable
parts inside.
•
Never
operate this unit when its
rear cover is removed.
•
Never
plug this unit into
a dimmer
pack.
•
Always
be
sure to
mount this unit
in
an area
that will allow proper ventilation. Allow
about 6"
(15cm)
between this device
and a wall.
•
Do
not attempt to
operate this unit,
if it becomes damaged.
e
This
unit
is intended for indoor
use
only;
use
of this product outdoors voids
all warranties.
• During
long periods of non-use, disconnect
the units main power.
To Next Page
Need help?
General