BMZ001 Series
Wearable Motion-Activated Musical Bandz
Age grade: 8 - Adult
8 - Adult
User Guide User Guide
Get Started
*Please refer to the product website for the recommended model of smartphones or tablets.
https://soundmoovz.dmetproducts.co.jp
1. Install SoundMoovz™ App from App Store or Google Play.
If you have already installed SoundMoovz™ Application, check for
available updates and make sure that the latest version is installed.
User friendly instructions on how to use the App are included in the App.
SoundMoovz™ bandz are adjustable from 5.6 – 8.9 inch (14.3 cm –
22.6 cm). Center SoundMoovz™ on top of your wrist or ankle.
shoes by putting the SoundMoovz™ Device through your shoelaces TWICE
as shown in the image below.
Make sure to place the SoundMoovz™ Device
between the second or third eyelets tightly
(DO NOT put the device between top eyelets).
3. Start with SoundMoovz™ powered off. Slide the switch shown in
the image below. The LED will light for 2 seconds and will turn off.
The power is now on.
4. Move and play with the sound and the App.
Switch
LED light
5. IMPORTANT! TO PRESERVE BATTERY LIFE ALWAYS
SWITCH OFF SoundMoovz™ WHEN NOT IN USE.
Battery Life
Continuous Operation Time Up to 150 hours
Stand By Time Up to 250 hours
Note: This alternative method is the only one recommended and no
Slide the band to adjust the fit and snap the pin
into the hole. For best results, SoundMoovz™
bandz should have a snug fit.
responsibility will be taken for any breakage or malfunction occurred
when the SoundMoovz™ Device is put on in different ways.
WARNING! This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell
Battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of
used batteries immediately. Keep new and used batteries away from children. If you think batteries
might have been swallowed or placed inside any part of the body, seek immediate medical attention.
IMPORTANT: Please retain packaging/instructions and purchase details for future reference as
they contain important information.
Model Number: BMZ001
Item Number
BLACK
66001
BLUE
66002
PINK 66003
5.6 inch (14.3 cm)
8.9 inch (22.6 cm)
Included in this Box
SoundMoovz™ FAQ
Front
Back
• SoundMoovz™ Device x 2
• Band x 2
• Battery CR2032 Installed Inside x 2
• Instruction Manual x 1
Product Checklist and Parts Identification
• Why is there a delay between movement and hearing sound?
If connecting to a separate speaker, use an auxiliary cord for a direct connection, instead
of using Bluetooth®.
• Why is there either no sound or multiple sounds coming from mobile device/speaker?
Adjust the sensitivity setting on the app – the higher the setting, the more sensitive to movement.
Sensitivity settings can be located on the top right of the pop-up tab when you tap on the device
balloon to change sounds. Repeat for all your SoundMoovz™ bandz.
If using auxiliary cable, make sure it is plugged in securely into both mobile device and speaker;
you may need to remove case from mobile device to allow cable to be inserted correctly (if case
is removed, make sure mobile device is in a secure position to prevent damage).
• Why does phone lock cause app to stop working?
Newest version of app allows continuous play, even when phone is in lock mode (make sure
you have latest version installed). If that does not work, go to your phone settings and disable
auto-lock feature while playing with SoundMoovz™.
• What IOS or Android update is needed to install app?
IOS: 10 or later
Android: 4.4 or later
• How do I pair SoundMoovz™ to my Bluetooth® device?
Turn on Bluetooth® from settings on your smart device. Open SoundMoovz™ app and tap
icon “+” to search for pairing. When SoundMoovz™ is ON, a device icon will be displayed on
the screen. Tap the device icon for pairing. When paired, a check symbol is shown over the
device icon.
• Why is my band not turning on?
Battery may need replacement – replace with a CR2032 battery.
To Next Page
Need help?
General