The following items are needed to complete the installation but are
not included:
• Shielded Ethernet cable long enough to reach from the adapter
installation location to the PoE injector - not to exceed 100
meters (328 feet) in length.
Step 1: Check Box Contents
Check that the following was shipped in the box. You will not need
every part for the steps in this guide, but verify now that all parts are
present:
• [1] Cradlepoint W1855 Series 5G Wideband Adapter
• [4] Cellular antennas
• [1] Device backplate and wall/pole mount assembly (two
connected pieces)
• [2] Pole mount clamps
• [2] Cable glands
To Next Page
Loading...
Need help?
General
