Need help?Do you have a question about the Craftex CX709 and is the answer not in the manual?
General| Swing Over Bed | 8-1/4" |
|---|---|
| Distance Between Centers | 16" |
| Spindle Speed | 100 - 2500 RPM |
| Motor Power | 3/4 HP |
| Weight | 143 lbs |
| Spindle Bore | 20mm |
How to adjust main spindle bearings for end play.
Machine cleaning, lubrication, and control lever checks before operation.
Checking electrical system, mechanical controls, coolant, and lubrication after motor start.
Monitoring bearing temperature, motor temperature, noise, and safety during operation.
Details of the manufacturer's limited warranty terms and conditions.
To Next Page
