page 3
1. Unpacking Your Fan.
Carefully open the packaging. Remove items from
Styrofoam inserts. Remove motor housing and place on
carpet or Styrofoam to avoid damage to finish. Do not
discard fan carton or Styrofoam inserts should this fan
need to be returned for repairs.
Check against parts inventory that all parts have been
included.
2. Parts Inventory.
a. canopy. 1 piece
b. hanging bracket. 1 piece
c. downrod and hanging ball. 1 piece
d. canopy cover (in hardware pack). 1 piece
e. motor housing. 1 piece
f. yoke cover. 1 piece
g. weatherproof hanging ball cover. 1 piece
h. fitter plate. 1 piece
i. light kit. 1 piece
j. glass shade. 1 piece
k. remote control receiver. 1 piece
l. wall control. 2 pieces
m. remote control cover. 1 piece
n. plate. 1 piece
o. faceplate. 3 pieces
p. blade. 5 pieces
q. hardware packs
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
bulbs required:
3 x 6 watt max. medium base LED bulbs
(included)
ml
a
c
e
g
f
d
h
b
i
j
p
no
k
q
w/ wall controls
11
-
DIM ON
To Next Page
Loading...
