Do you have a question about the Craftsman 021022 and is the answer not in the manual?
Position the pressure washer outdoors before starting operation.
Verify that carbon monoxide alarms are functioning before use.
Add the correct type and amount of oil and fuel to the unit.
Lubricate O-rings for proper sealing and function.
Connect the garden hose to the pressure washer inlet.
Connect the garden hose to the water supply.
Purge air from the pressure washer system.
Assemble the spray wand and connect the spray tip to the gun.
Pull the recoil starter to begin operation.
Turn the engine switch to the OFF position.
Purge residual pressure from the system.
Position the pressure washer outdoors before starting operation.
Verify that carbon monoxide alarms are functioning before use.
Add the correct type and amount of oil and fuel to the unit.
Lubricate O-rings for proper sealing and function.
Connect the garden hose to the pressure washer inlet.
Connect the garden hose to the water supply.
Purge air from the pressure washer system.
Assemble the spray wand and connect the spray tip to the gun.
Pull the recoil starter to begin operation.
Turn the engine switch to the OFF position.
Purge residual pressure from the system.
| Flow Rate (GPM) | 1.2 GPM |
|---|---|
| Engine Type | Gasoline |
| Water Flow | 1.2 GPM |
| Pump Type | Axial Cam |
| Hose Length | 25 ft |
| Oil Type | SAE 30 |
| Nozzles Included | 0°, 25°, Soap |












Loading...