A
aarondavisJul 31, 2025
What to do if my Craftsman Blower unit will not start?
- SStephen JeffersonJul 31, 2025
If your Craftsman Blower unit won't start, here are a few things to check: * Make sure the unit is plugged into an electrical outlet. * Ensure the power/speed switch isn't in the OFF position; slide it to high or low. * Verify the vac tubes are correctly installed so the switch can engage. * Confirm the vacuum gate/port is fully closed and locked. * Check your house circuit breaker panel and reset it if necessary.